- Horario. Lun - Sab 09.00 - 20.00
Caudalímetro
V-Cone Flow Meter
High-Accuracy Differential Pressure Flow Measurement for Harsh Process Conditions
The V-Cone flow meter is an advanced differential pressure (DP) flow measurement device designed for accurate and repeatable measurement of liquids, gases, and steam under demanding process conditions. By placing a cone-shaped obstruction in the center of the pipe, the V-Cone creates a stable differential pressure that is less sensitive to upstream flow disturbances.
Instrava V-Cone flow meters are engineered for applications where space is limited, flow profiles are unstable, or traditional DP meters struggle to maintain accuracy. With no moving parts and strong resistance to erosion and vibration, the V-Cone meter delivers long-term reliability in high-pressure, high-temperature, and multiphase environments.
Flow Meter Description
V-Cone Flow Meter-Key Features 1
Minimal installation requirements
Built-in flow conditioning reshapes velocity distribution, eliminating eddies and dead zones. Straight pipe requirements are greatly reduced: upstream 0–3D (up to 30D depending on application), downstream 0–1D.Wide turndown ratio
Typical turndown ratio of 10:1, with a maximum up to 50:1, enabling accurate measurement across wide flow ranges.Low permanent pressure loss with stable signal
For the same β ratio, pressure loss is only 1/3–1/5 of an orifice plate, while signal fluctuation is reduced to approximately 1/10, ensuring superior measurement stability.Excellent wear resistance
The streamlined V-cone geometry creates a localized vacuum effect on the cone surface, significantly reducing direct particle impingement and extending service life.Self-cleaning, non-clogging design
Full purging flow pattern prevents sediment deposition, particle accumulation, and media adhesion—ideal for dirty and particulate-laden fluids.
V-Cone Flow Meter-Key Features 2
Long-term measurement stability
The β ratio remains stable over extended operation, ensuring consistent accuracy and repeatability throughout the product lifecycle.High accuracy and repeatability
Measurement accuracy up to ±0.5% F.S, with repeatability of ±0.1% F.S, suitable for demanding process control applications.Wide β ratio selection
The unique V-cone geometry allows a broad range of β values, enabling flexible design for various flow rates and operating conditions.Multiple installation configurations
Available in pipeline type, flanged tapping, wafer type, and insertion (plug-in) configurations to suit different installation requirements.Broad nominal diameter coverage
Nominal sizes from DN15 to DN2000 (1/2″–120″), with larger or customized sizes available upon request.
V-Cone Flow Meter-Key Features 3
High-temperature and high-pressure capability
Designed for extreme conditions with maximum working temperature up to 700 °C and maximum pressure up to 42 MPa.Suitable for dirty and abrasive media
Proven performance in challenging media such as coke-oven gas, blast furnace gas, feedstock oil, and residual oil.Capable of multiphase measurement
Reliable measurement of gas–liquid two-phase flows, including moisture-laden gas and fluids containing condensed water.
V-Cone Flow Meter Working Principle
The V-Cone flow meter is a differential pressure flow measurement device operating on the principle of energy conversion in a closed pipeline. As fluid flows through the pipe, its velocity and static pressure change according to Bernoulli’s principle.
When the medium approaches the upstream section of the V-cone, the static pressure is P₁. As the flow passes around the cone, the effective flow area is reduced, causing the fluid velocity to increase and the static pressure to decrease to P₂ at the throttling region. The pressure difference ΔP = P₁ − P₂ is generated.
This differential pressure is transmitted to a differential pressure transmitter through upstream and downstream pressure tapping ports. Because the differential pressure is proportional to the square of the flow velocity, the actual flow rate can be accurately calculated from the measured ΔP value.
As the flow rate increases or decreases, the differential pressure changes correspondingly, enabling continuous, stable, and repeatable flow measurement for liquids, gases, steam, and multiphase media.
Flow Meter Parameter
| Parámetro | Especificación |
|---|---|
| Modelo | VCF 121 |
| Clase de precisión | 0.5 |
| Long-term Stability | ±0.1% F.S / year |
| Repetibilidad | ±0.1% |
| Minimum Flow Velocity | ≥ 0.1 m/s |
| Turndown Ratio | Typical 15:1; Maximum 50:1 |
| Reynolds Number Range | 8 × 10³ ~ 5 × 10⁶ |
| Operating Pressure | ≤ 16 MPa (up to 42 MPa maximum) |
| Temperatura de funcionamiento | -160 °C ~ 700 °C |
| Nominal Diameter | DN15 ~ DN2000 (1/2″ ~ 120″) |
| Temperatura ambiente | ≤ 80 °C |
| Humedad relativa | 5% ~ 85% |
| Señal de salida | 4 ~ 20 mA |
| Fuente de alimentación | 24 V DC |
| DP Transmitter Supply Voltage | 24 V DC |
| DP Transmitter Output Current | 4 ~ 20 mA |
| Intelligent Flow Totalizer Voltage | 220 V AC |
| Intelligent Flow Totalizer Output | 4 ~ 20 mA |
| DP Transmitter Communication | HART / BRAIN |
| Flow Computation Indicator Communication | RS232 / RS485 |
| Installation Types | Flanged type, welded type, clamped type, insertion type |
Applicable Conditions
Nominal diameter: DN15 ~ DN2000
Flow velocity: ≥ 0.1 m/s
Working pressure: -0.1 MPa ~ 42 MPa
Working temperature: -160 °C ~ 700 °C
Temperatura ambiente: ≤ 85 °C
In addition to standard gas, liquid, and steam measurement, the V-Cone flow meter is suitable for challenging media, including high-dust gases, fluids with high suspended solids, high-viscosity media, strongly corrosive fluids, crystallizing media, and supersaturated process conditions.
Flow Meter OEM/ODM
Personalización y servicio OEM
Instrava is a partner focused on providing equipment, solutions, and services for industrial measurement and control instruments used in safety-critical and process control applications. We are committed to providing reliable and long-lasting solutions based on trust, communication, and collaboration, helping customers improve process efficiency and measurement accuracy.
As a trusted long-term partner for customers and OEM partners in China, Instrava provides professional OEM and customization services for venturi flow meters and industrial flow measurement solutions.
Recomendaciones de productos relacionados
Yes. V-Cone flow meters are designed with robust construction and no moving parts, allowing stable operation under high-pressure conditions. With appropriate material and pressure rating selection, they can be used in systems up to 42 MPa.
The centrally mounted V-cone acts as an internal flow conditioner, reshaping velocity distribution and minimizing the influence of swirl and turbulence. This allows accurate measurement even when upstream flow is highly disturbed.
No. One key advantage of the V-Cone flow meter is its minimal straight pipe requirement. In many applications, it requires 0–3D upstream and 0–1D downstream, making it ideal for space-limited installations.
Yes. V-Cone flow meters are widely used in saturated and superheated steam applications. Their ability to withstand high temperature and pressure, combined with stable differential pressure signals, makes them suitable for power and boiler systems.
Yes. V-Cone flow meters perform well in gas–liquid two-phase flow conditions, including wet gas and fluids containing condensed water. The self-cleaning cone design helps maintain measurement stability in multiphase environments.
The streamlined cone geometry creates a purging flow pattern that prevents particle buildup and clogging. This makes V-Cone meters suitable for high-dust gases, fluids with suspended solids, and viscous or fouling media.
Por qué elegir Instrava
Al elegir Instrava, obtiene un socio con un profundo conocimiento de las aplicaciones industriales y la experiencia necesaria para hacer frente a los retos operativos actuales.
Nuestro papel va más allá de los productos: respaldamos su éxito con soluciones fiables y un compromiso a largo plazo.
Innovación impulsada por la ingeniería
La innovación en Instrava se guía por necesidades industriales reales. Perfeccionamos continuamente nuestras tecnologías para hacer frente a los cambiantes retos operativos, garantizando un rendimiento práctico y fiable en entornos exigentes.
Personalización específica de la aplicación
Ofrecemos personalización a nivel de ingeniería para adaptarnos a las condiciones específicas del proceso. Desde el rango de medición y los materiales hasta las señales de salida y las opciones de instalación, nuestras soluciones están configuradas para adaptarse a aplicaciones reales.
Calidad y fiabilidad demostradas
La calidad y la fiabilidad son fundamentales en todos los productos Instrava. Fabricados bajo estrictos controles de calidad y sometidos a pruebas exhaustivas, nuestros instrumentos ofrecen un rendimiento preciso, estable y a largo plazo.
Capacidad global con apoyo local
Instrava combina la experiencia mundial en ingeniería con una asistencia local receptiva, lo que garantiza que nuestros socios se beneficien de una tecnología alineada internacionalmente y de un servicio regional puntual.
Amplia cartera de productos
Nuestra amplia cartera de instrumentos de medición y control nos permite dar respuesta a una amplia gama de necesidades industriales, proporcionando soluciones integradas a partir de una fuente única y fiable.
Asistencia técnica orientada a los socios
Trabajamos en estrecha colaboración con nuestros socios, desde el asesoramiento técnico hasta la asistencia posventa. Nos centramos en ofrecer soluciones que generen un valor duradero y contribuyan al éxito operativo a largo plazo.
