Tekanan Termal vs Vortex vs Diferensial: Cara Memilih Teknologi Pengukuran Aliran yang Tepat
Memilih pengukur aliran jarang sekali hanya tentang akurasi. Dalam aplikasi industri, tantangan yang sebenarnya meliputi: Laju aliran variabel Tekanan...
- Jadwal. Senin - Sabtu 09.00 - 20.00
Pengukur Aliran
Portable Ultrasonic Flow Meter
Why Engineers Choose Portable Ultrasonic Flow Meters
In real industrial environments, flow measurement often faces practical constraints:
Pipelines cannot be shut down or cut
Temporary measurements for commissioning, troubleshooting, or energy audits
Wide pipe diameter ranges across different locations
Requirement for fast deployment and immediate results
Portable ultrasonic flow meters are specifically designed for non-permanent, on-site measurement tasks where flexibility and speed are critical.
Flow Meter Description
Solving Field Uncertainty, Not Just Measuring Flow
Unlike fixed mechanical or differential pressure flow meters, portable ultrasonic flow meters are designed for maximum field adaptability rather than permanent installation.
Non-intrusive measurement – clamp-on installation without cutting, welding, or process interruption
Rapid deployment – sensors can be mounted and commissioned within minutes
One instrument, multiple pipelines – ideal for inspection, verification, troubleshooting, and comparative testing
Immediate data availability – supports real-time diagnostics, performance evaluation, and decision-making
For engineers, a portable ultrasonic flow meter serves as a mobile diagnostic and verification tool, enabling confident on-site measurement under changing field conditions.
Portable Ultrasonic Flowmeter Working Principle
Portable ultrasonic flow meters use the Transit-Time (Time-of-Flight) method:
Ultrasonic signals are transmitted with and against the flow direction
Flow velocity causes a difference in upstream and downstream travel time
The time difference is converted into average flow velocity
Volume flow rate is calculated based on pipe diameter parameters
✔ No contact with the medium
✔ Independent of pressure
✔ No moving or wearing parts
Portable Ultrasonic Flow Meter Mechanical Design & Reliability
Built for Repeated Field Use
Portability does not mean reduced robustness. The structural design focuses on on-site reliability:
Main unit: High-contrast backlit LCD for outdoor and low-light environments
Sensors: Clamp-on or insertion types for different pipe sizes and materials
Cabling & interfaces: Industrial-grade, resistant to bending and electromagnetic interference
Internal structure: No mechanical wear components, ensuring long-term stability
Ideal for repeated inspections, multi-point testing, and cross-project use.
Portable Ultrasonic Flowmeter Typical Applications
Industrial cooling water and circulation systems
HVAC system commissioning and energy evaluation
Temporary flow verification and comparative testing
Flow assessment prior to pipeline retrofitting
Energy audits and efficiency improvement projects
Flow Meter Parameter
| Item | Spesifikasi |
|---|---|
| Flow velocity range | ±0.03 ft/s to ±40 ft/s (±0.01 m/s to ±12 m/s) |
| Measurement accuracy | ±1% of measured value |
| Pipe size | Clamp-on installation: 1″ to 48″ (25 mm to 1200 mm) |
| Measured medium | Single-phase liquid |
| Pipe material compatibility | Carbon steel, stainless steel, PVC, and other dense solid pipes |
| Analog output | 4–20 mA, max load 750 Ω |
| Communication protocol | RS485 / Modbus |
| Data storage | 16 GB SD card (optional) |
| Logging interval | 1 to 99,999 seconds (configurable) |
| Display & operation | 240 × 128 backlit LCD with digital keypad |
| Power supply | Rechargeable lithium battery, 3000 mAh |
| Battery operating time | Approx. 16 hours of continuous operation |
| Operating temperature – transmitter | −40 °C to +60 °C |
| Operating temperature – transducer | −40 °C to +80 °C (standard), up to +120 °C (optional) |
| Ambient humidity | Up to 99% RH, non-condensing |
| Protection rating | Transmitter: NEMA 13 / IP54Sensor: IP68 |
| Transducer cable length | Standard 5 m (16 ft); longer lengths available on request |
Instrava OEM / ODM
Instrava Approach
Instrava delivers more than instruments — we focus on application success:
Sensor selection based on pipe diameter and material
Measurement guidance for low-flow or aging pipelines
OEM and project-based customization support
Long-term technical service and collaboration
Instrava adalah mitra yang berfokus pada penyediaan peralatan, solusi, dan layanan untuk instrumen pengukuran dan kontrol industri yang digunakan dalam aplikasi kontrol proses dan keselamatan.
We help customers improve efficiency through trust, communication, and collaboration.
Rekomendasi Produk Terkait
Yes, under stable flow conditions and with sufficient straight pipe length, low flow measurement is achievable.
Small, evenly distributed bubbles have limited impact, while excessive aeration or two-phase flow may reduce signal stability.
Yes. Clamp-on ultrasonic technology is particularly advantageous for large pipelines due to low installation cost and minimal disruption.
No. The same instrument can be used with different pipe materials by adjusting sensor parameters.
The device supports continuous operation, although it is primarily designed for portable and temporary measurement tasks.
Yes. When combined with temperature sensors, it can calculate thermal energy for heating and cooling applications.
Mengapa Memilih Instrava
Dengan memilih Instrava, Anda mendapatkan mitra dengan pemahaman mendalam tentang aplikasi industri dan keahlian untuk memenuhi tantangan operasional saat ini.
Peran kami lebih dari sekadar produk-kami mendukung kesuksesan Anda melalui solusi yang dapat diandalkan dan komitmen jangka panjang.
Inovasi Berbasis Rekayasa
Inovasi di Instrava dipandu oleh kebutuhan industri yang nyata. Kami terus menyempurnakan teknologi kami untuk menjawab tantangan operasional yang terus berkembang, memastikan kinerja yang praktis dan andal di lingkungan yang penuh tuntutan.
Kustomisasi Khusus Aplikasi
Kami menyediakan kustomisasi tingkat teknik agar sesuai dengan kondisi proses tertentu. Dari rentang pengukuran dan bahan hingga sinyal keluaran dan opsi pemasangan, solusi kami dikonfigurasikan agar sesuai dengan aplikasi nyata.
Kualitas dan Keandalan yang Terbukti
Kualitas dan keandalan merupakan hal yang mendasar bagi setiap produk Instrava. Diproduksi di bawah kontrol kualitas yang ketat dan diuji secara menyeluruh, instrumen kami memberikan kinerja yang akurat, stabil, dan jangka panjang.
Kemampuan Global dengan Dukungan Lokal
Instrava menggabungkan keahlian teknik global dengan dukungan lokal yang responsif, memastikan mitra kami mendapatkan keuntungan dari teknologi yang selaras secara internasional dan layanan regional yang tepat waktu.
Portofolio Produk yang Komprehensif
Portofolio instrumen pengukuran dan kontrol kami yang luas memungkinkan kami untuk memenuhi berbagai kebutuhan industri, memberikan solusi terintegrasi dari satu sumber yang dapat diandalkan.
Dukungan Rekayasa Berorientasi Mitra
Kami bekerja sama dengan mitra kami mulai dari konsultasi teknis hingga dukungan purna jual. Fokus kami adalah memberikan solusi yang menciptakan nilai yang langgeng dan mendukung kesuksesan operasional jangka panjang.
Pengukur Aliran Roda Gigi Oval: Mengapa Masih Mendominasi Pengukuran Aliran Viskositas Tinggi dalam Otomasi Modern
Kegigihan Pengukur Aliran Roda Gigi Oval yang Tenang Di era di mana sensor pintar, kembar digital, dan instrumentasi berbasis AI mendominasi...
Pengukur Aliran Ultrasonik Portabel - Pengukuran Aliran Industri yang Akurat
Pengukur Aliran Ultrasonik Portabel - Pengukuran Aliran Industri yang Akurat | Pengukur Aliran Ultrasonik Portabel Instrava Ikhtisar Pengukur aliran ultrasonik portabel ...
