Transmisor
Designed for continuous dissolved oxygen monitoring in water and wastewater processes, this optical dissolved oxygen sensor eliminates the limitations of traditional membrane-based probes. With no electrolyte, no oxygen consumption, and no flow dependency, it delivers stable, accurate measurements even in low-flow or static conditions.
It is especially suitable for applications where long-term stability, low maintenance, and reliable digital communication are critical.
Transmitters & Sensors Description
Why Optical Dissolved Oxygen Measurement
Traditional electrochemical DO sensors require membranes, electrolytes, and frequent maintenance. This optical dissolved oxygen sensor adopts fluorescence measurement technology, providing a fundamentally different approach:
No membrane, no electrolyte, no polarization
No oxygen consumption during measurement
Stable readings independent of flow velocity
Longer service life with significantly reduced maintenance cost
This makes it ideal for unattended operation and harsh field environments.
Dissolved O2 Sensor Features
Membrane-free design with no electrolyte replacement
No polarization effect, no drift caused by oxygen consumption
Fluorescent cap is easy to replace when required
Fast response time and excellent long-term stability
Minimal annual drift ensures consistent performance
Built-in temperature sensor with automatic temperature compensation
Fully sealed IP68 housing for submersible installation
316L stainless steel + PPS body resists corrosion
Not affected by flow rate, bubbles, or low-velocity conditions
RS485 communication (Modbus-compatible)
Easy connection to PLC, SCADA, or upper-level control systems
Dissolved Oxygen Sensors Applications
Wastewater treatment (aeration basins, biological tanks)
Surface water and environmental monitoring
Aquaculture and fish farming systems
Industrial process water
Municipal water and utility monitoring
Dissolved Oxygen Sensor Designed for Long-Term Operation
By removing consumable components and minimizing maintenance requirements, this dissolved oxygen sensor significantly reduces total cost of ownership while ensuring reliable data for process control and environmental compliance.
It is not just a sensor—it is a long-term monitoring solution.
Transmitters & Sensors Parameter
| Parámetro | Especificación |
|---|---|
| Measurement Principle | Optical fluorescence |
| Dissolved Oxygen Range | 0 ~ 20 mg/L or 0 ~ 200 % saturation |
| Temperature Range (Process) | 0 ~ 45 ℃ |
| Operating Pressure | ≤ 0.3 MPa |
| Measurement Accuracy | DO: ±0.3 mg/L or ±3 %Temperature: ±0.5 ℃ |
| Señal de salida | RS485 |
| Housing Material | 316L Stainless Steel + PPS |
| Protection Class | IP68 |
| Sensor Dimensions | Ø49.5 × 251.5 mm |
| Installation Method | Submersible |
| Temperatura ambiente | 0 ~ 60 ℃ |
| Humedad relativa | < 90 % RH |
| Cable Length | 10 m standardUp to 100 m customizable |
Instrava OEM/ODM
Instrava goes beyond supplying sensors. We work as a long-term engineering partner, supporting customers from selection to deployment and long-term operation.
Application-oriented sensor selection
Sensor configuration optimized for wastewater, environmental water, aquaculture, or industrial processes.
Installation & mounting design
Support for submersible, pipeline, tank, or custom installation structures.
Signal & system integration
RS485 communication mapping for PLC, DCS, SCADA, and data acquisition systems.
Cable length & material customization
Extended cables (up to 100 m) and material options for harsh environments.
Multi-parameter system design
Integration with pH, ORP, conductivity, turbidity, and temperature sensors.
OEM & private labeling services
Branding, enclosure customization, and documentation support.
Pre-sales application analysis
Selection guidance for complex operating conditions
Commissioning support and parameter configuration
Long-term technical support and lifecycle consultation
Instrava focuses on trust, communication, and collaboration, helping customers reduce risk, improve reliability, and extend system service life.
Yes.
This sensor uses optical fluorescence technology and does not consume oxygen during measurement. The reading is independent of flow velocity, making it highly reliable in low-flow or stagnant conditions.
The optical measurement principle is far less sensitive to bubbles than electrochemical sensors. Occasional bubbles do not significantly affect readings, especially in aeration tanks or mixed water environments.
The sensor features minimal annual drift and no electrolyte consumption. Compared to membrane-based DO probes, it maintains accuracy over long periods with significantly reduced recalibration frequency.
Routine maintenance is minimal.
There is no membrane or electrolyte to replace. The fluorescent cap has a long service life and can be easily replaced when required, reducing downtime and maintenance cost.
Yes.
The sensor supports RS485 communication, typically using Modbus protocol, allowing seamless integration with PLC, DCS, SCADA, and data logging systems.
Absolutely.
With an IP68-rated housing and 316L stainless steel + PPS construction, the sensor is designed for continuous submersible operation in corrosive, high-humidity, and industrial wastewater conditions.
Al elegir Instrava, obtiene un socio con un profundo conocimiento de las aplicaciones industriales y la experiencia necesaria para hacer frente a los retos operativos actuales.
Nuestro papel va más allá de los productos: respaldamos su éxito con soluciones fiables y un compromiso a largo plazo.
La innovación en Instrava se guía por necesidades industriales reales. Perfeccionamos continuamente nuestras tecnologías para hacer frente a los cambiantes retos operativos, garantizando un rendimiento práctico y fiable en entornos exigentes.
Ofrecemos personalización a nivel de ingeniería para adaptarnos a las condiciones específicas del proceso. Desde el rango de medición y los materiales hasta las señales de salida y las opciones de instalación, nuestras soluciones están configuradas para adaptarse a aplicaciones reales.
La calidad y la fiabilidad son fundamentales en todos los productos Instrava. Fabricados bajo estrictos controles de calidad y sometidos a pruebas exhaustivas, nuestros instrumentos ofrecen un rendimiento preciso, estable y a largo plazo.
Instrava combina la experiencia mundial en ingeniería con una asistencia local receptiva, lo que garantiza que nuestros socios se beneficien de una tecnología alineada internacionalmente y de un servicio regional puntual.
Nuestra amplia cartera de instrumentos de medición y control nos permite dar respuesta a una amplia gama de necesidades industriales, proporcionando soluciones integradas a partir de una fuente única y fiable.
Trabajamos en estrecha colaboración con nuestros socios, desde el asesoramiento técnico hasta la asistencia posventa. Nos centramos en ofrecer soluciones que generen un valor duradero y contribuyan al éxito operativo a largo plazo.
Long-term dissolved oxygen monitoring is fundamentally different from short-term measurement. While many dissolved oxygen sensors can deliver acceptable accuracy at...
Dissolved oxygen (DO) measurement is a critical parameter in water treatment, aquaculture, environmental monitoring, and industrial processes. Among available technologies,...
How Measurement Data Becomes a Decision Variable in Modern Industrial Systems From Field Measurement to Process Decision In traditional process...
