- Horaire. Lun - sam 09.00 - 20.00
Débitmètre
Wedge Flow Meter
The wedge flow meter is a differential pressure flow measurement instrument designed for accurate and stable flow measurement under harsh industrial conditions. It integrates a wedge-type flow sensor with a differential pressure transmitter to provide reliable performance for complex process applications.
It is especially suitable for measuring city gas and natural gas with large flow fluctuations, where flow rates may vary significantly over time. It also effectively solves flow measurement challenges for high-viscosity media such as pitch, asphalt, residual oil, and paraffinic oil.
With its simple structure, strong resistance to clogging, and stable differential pressure signal, the wedge flow meter performs reliably in corrosive, dirty, and slurry applications, including saturated or crystallizing acidic, alkaline, and saline liquids.
The wedge flow meter is ideal for extreme conditions, supporting Reynolds numbers as low as 500 and fluid viscosities up to 500 mPa·s, offering a low-maintenance and cost-effective solution for industrial flow measurement.
Flow Meter Description
Optimized Product Features 1 – Wedge Flow Meter
High accuracy and excellent stability
Measuring accuracy up to ±0.5% F.S, with long-term stability of ±0.1% F.S/year, ensuring reliable and repeatable flow measurement.Simple and robust structure with long service life
The wedge-shaped flow sensor features a proven differential pressure design. After strict testing and calibration, the service life can reach up to 10 years, enabling up to 5 years of maintenance-free operation.Wide measuring range
Standard turndown ratio of 1:25, expandable to 1:33, and up to 1:100 with differential pressure adjustment, suitable for applications with large flow variations.Wide application range for complex media
Suitable for single-phase fluids as well as two-phase media (gas–liquid, gas–solid, liquid–solid). Operates with Reynolds numbers as low as 300 and up to 1×10⁷.Anti-adhesion and non-clogging design
The special wedge structure and smooth measuring pipe prevent adhesion, deposition, and clogging by silt, powder, suspended solids, and fibers, ensuring long-term measurement accuracy.
Optimized Product Features 2 – Wedge Flowmeter
Integrated installation design
Integrates the wedge sensor, three-valve manifold, and differential pressure transmitter into a single unit, eliminating impulse lines and fittings, simplifying installation, and improving measurement accuracy.Intelligent and configurable
Supports HART and other communication protocols for parameter configuration. Enables automatic adjustment of differential pressure based on medium changes and supports multi-parameter measurement, including differential pressure, volumetric flow, mass flow, pressure, and temperature, with full temperature compensation.Low straight pipe length requirement
Requires minimal upstream and downstream straight pipe lengths, effectively reducing installation uncertainty and improving measurement reliability.Low permanent pressure loss
Optimized flow structure minimizes pressure loss, helping reduce energy consumption and operating costs.
Working Principle of Wedge Flow Meter
Le wedge flow meter operates on the same differential pressure measurement principle as traditional orifice plates and Venturi flow meters, based on the Bernoulli equation and the law of conservation of mass.When fluid flows through a throttling element, a differential pressure is generated,which is proportional to the square of the flow rate.
The sensing element of the wedge flow meter is a V-shaped wedge throttling element.Its rounded downstream edge and special geometry effectively reduce upstream vortex formation,prevent particle accumulation, and avoid blockage when measuring high-viscosity, dirty, slurry, or particle-laden media.
As the fluid passes through the wedge, a stable differential pressure is produced.The square root of the differential pressure is directly proportional to volumetric flow rate or mass flow rate.The measuring range is determined by the ratio of the wedge height H to the pipe inner diameter D (H/D ratio).
Flow Calculation Formula
Volume flow rate:
qv =
C · ε · m · (πD2 / 4) · √(2ΔP / ρ) / √(1 − m2)
Parameter Definitions
- qv – Volume flow rate (m³/s)
- C – Flow coefficient
- ΔP – Differential pressure (Pa)
- ε – Expansion factor
- D – Inner diameter of pipe (m)
- ρ – Fluid density (kg/m³)
- m – Throttle area ratio
Throttle Area Calculation
m = S1 / (πD2 / 4)
Arch flow area (S1):
S1 = 1/2 · r · l − x · (r − h)
x = 2√[h(2r − h)]
l = 0.01745 · r · α
Thanks to its stable differential pressure signal and anti-clogging structure,the wedge flow meter maintains long-term measurement stability of up to
±0.1% F.S/year, making it an ideal solution for the most challenging industrial flow measurement applications.
Wedge Type Flow Meter Product Applications
Wedge flow meters are widely used in:
City gas and natural gas distribution systems
Oil, asphalt, pitch, and residual oil pipelines
Chemical and petrochemical processing plants
Slurry, sludge, and wastewater treatment systems
Steam and condensate measurement
Corrosive acid, alkali, and saline fluid measurement
Flow Meter Parameter
Model: WF 122
| Paramètres | Spécifications |
|---|---|
| Classe de précision | 0.5 (0.2 / 0.3 / 0.4 available on request) |
| Long-term Stability | ±0.2% F.S / year |
| Répétabilité | ±0.2% |
| Applicable Media | Liquids, gases, and steam |
| Minimum Flow Velocity | 0.01 m/s |
| Measuring Range (Turndown Ratio) | Standard: 1:25; Maximum: 1:33 |
| Permanent Pressure Loss | Approx. 1/5 of measuring differential pressure (about 1/3 of an orifice plate) |
| Reynolds Number Range | ≥500 to ≤1 × 10⁷ |
| Medium Viscosity | ≥500 mPa·s |
| Working Pressure Range | –0.1 to 42 MPa |
| Working Temperature Range | –160 °C to 450 °C (up to 700 °C max) |
| Pipe Size | DN10 to DN1200 (up to DN2500 on request) |
| Wedge Ratio (h/D) | 0.2 / 0.3 / 0.4 / 0.5 |
| DP Transmitter Power Supply | 24 V DC |
| DP Transmitter Output | 4–20 mA DC (HART) |
Flow Meter OEM/ODM
Personnalisation et service OEM
Wedge flow meters can be customized to suit specific operating conditions, including:
Pipe diameter and pressure rating
Material selection for corrosive or abrasive media
Pressure tapping configuration
Integrated or remote differential pressure transmitter
Special designs for high-temperature or high-pressure applications
Instrava is a partner focused on providing equipment, solutions, and services for industrial measurement and control instruments used in safety-critical and process control applications. We are committed to providing reliable and long-lasting solutions based on trust, communication, and collaboration, helping customers improve process efficiency and measurement reliability.
As a trusted long-term partner for customers and OEM partners in China, Instrava provides professional OEM and customization services for wedge flow meters and industrial flow measurement solutions.
Recommandations de produits connexes
Wedge flow meters are specifically designed for applications with wide flow variations. With a standard turndown ratio of 1:25 (expandable to 1:33 or higher), they maintain stable differential pressure signals even when flow rates change significantly, making them ideal for city gas, natural gas, and batch processes.
Yes. The wedge flow meter performs reliably with fluid viscosities exceeding 500 mPa·s and supports Reynolds numbers as low as 500. Its wedge-shaped throttling element minimizes flow separation and signal distortion, allowing accurate measurement of high-viscosity, shear-sensitive, and non-Newtonian fluids.
Absolutely. The non-clogging wedge structure prevents the accumulation of solids, fibers, and sediments. This makes wedge flow meters especially suitable for slurry, wastewater, pulp, sludge, and crystallizing chemical media where traditional orifice plates may fail.
A wedge flow meter typically generates only about one-third of the permanent pressure loss of an orifice plate under similar operating conditions. This significantly reduces energy consumption while maintaining accurate differential pressure measurement.
Wedge flow meters require shorter upstream and downstream straight pipe lengths compared to traditional differential pressure flow meters. This makes them well suited for retrofit projects and installations with limited piping space.
Thanks to its robust structure and absence of moving parts, the wedge flow meter requires minimal maintenance. In most applications, it can operate up to 5 years without recalibration, providing long-term stability of ±0.2% F.S/year and reducing total cost of ownership.
Pourquoi choisir Instrava ?
En choisissant Instrava, vous bénéficiez d'un partenaire ayant une connaissance approfondie des applications industrielles et l'expertise nécessaire pour relever les défis opérationnels d'aujourd'hui.
Notre rôle va au-delà des produits - nous soutenons votre réussite grâce à des solutions fiables et à un engagement à long terme.
L'innovation par l'ingénierie
L'innovation chez Instrava est guidée par les exigences industrielles réelles. Nous affinons continuellement nos technologies pour répondre aux défis opérationnels en constante évolution, en garantissant des performances pratiques et fiables dans des environnements exigeants.
Personnalisation en fonction de l'application
Nous offrons une personnalisation au niveau de l'ingénierie pour répondre aux conditions spécifiques du processus. De la plage de mesure et des matériaux aux signaux de sortie et aux options d'installation, nos solutions sont configurées pour s'adapter aux applications réelles.
Une qualité et une fiabilité éprouvées
La qualité et la fiabilité sont fondamentales pour chaque produit Instrava. Fabriqués sous un contrôle de qualité strict et testés de manière approfondie, nos instruments offrent des performances précises, stables et à long terme.
Une capacité mondiale avec un soutien local
Instrava associe une expertise technique mondiale à un support local réactif, garantissant à nos partenaires une technologie alignée au niveau international et un service régional opportun.
Un portefeuille de produits complet
Notre large gamme d'instruments de mesure et de contrôle nous permet de répondre à un grand nombre de besoins industriels, en fournissant des solutions intégrées à partir d'une source unique et fiable.
Soutien technique axé sur les partenaires
Nous travaillons en étroite collaboration avec nos partenaires, de la consultation technique à l'assistance après-vente. Notre objectif est de fournir des solutions qui créent une valeur durable et soutiennent le succès opérationnel à long terme.
