Meilleur détecteur de niveau pour les matériaux collants : Guide pratique d'ingénierie
Selecting the best level switch for sticky materials is rarely straightforward.
Sticky materials behave unpredictably:
They coat sensor surfaces
They retain moisture
They leave residue after discharge
Their dielectric properties vary over time
Because of this, many conventional level switches begin to fail—not immediately, but progressively.
The best solution depends on how the material interacts with the sensing principle.
Why Sticky Materials Cause Level Switch Failures
Sticky materials create two primary problems:
Surface buildup on the sensor
Signal distortion caused by retained residue
These effects often lead to:
Fausses alarmes de haut niveau
Détection de bas niveau manquée
Recalibrage fréquent
Increased maintenance downtime
The root cause is usually not poor device quality—but technology mismatch.
Failure Rate by Level Switch Type in Sticky Applications
| Level Switch Type | Annual Failure Incidents |
|---|---|
| Capacitive | 9–12 |
| Rotary Paddle | 4–6 |
| Tuning Fork | 2-4 |
| RF Admittance | 1–3 |
Electrical sensors without coating compensation tend to show higher instability, while technologies that isolate buildup effects perform more consistently.
Comparing Level Switch Technologies for Sticky Materials
1️⃣ Capacitive Level Switch
Avantages :
Simple design
Cost-effective
Sensitive detection
Limitations in sticky materials:
Highly affected by coating
Sensitive to dielectric variation
Requires frequent recalibration
Suitable only if coating is minimal and cleaning is routine.
2️⃣ Rotary Paddle Level Switch
Avantages :
Mechanical detection
Not dependent on dielectric properties
Reliable in coarse solids
Limites :
Struggles with heavy, adhesive buildup
Moving parts increase maintenance
Not ideal for wet or pasty materials
Better for granular solids than sticky slurries.
3️⃣ Tuning Fork Level Switch
Avantages :
Detects density change through vibration damping
Less sensitive to dielectric variation
Good for powders and light coating
Limites :
Heavy buildup can damp vibration
Not ideal for extremely viscous materials
Strong option for moderately sticky media.
4️⃣ RF Admittance Level Switch
Avantages :
Actively compensates for probe coating
Handles variable dielectric materials
Stable long-term switching
Limites :
More complex than basic capacitive
Not required in simple dry applications
Particularly effective when coating is persistent and dielectric properties fluctuate.
Stability Over Time in Coating Environments
Long-term reliability diverges significantly as coating accumulates. Technologies designed to compensate for buildup maintain higher stability.
Decision Framework: Which Level Switch Is Best?
The “best” interrupteur de niveau depends on material behavior.
Choose based on:
✔ Coating Severity
Light coating → Tuning fork may suffice
Heavy, persistent coating → RF admittance preferred
✔ Material Moisture Variation
Stable dielectric → Capacitive acceptable
Variable dielectric → RF admittance more stable
✔ Maintenance Access
Easy cleaning → Mechanical solutions viable
Limited access → Low-drift technology critical
✔ Material State
Granular solids → Rotary paddle
Sticky powder or slurry → Tuning fork or RF admittance
There Is No Universal Best—Only Best Fit
The best level switch for sticky materials is the one that:
Minimizes false alarms
Reduces maintenance cycles
Maintains switching stability over time
Matches the material’s physical and electrical behavior
In many coating-prone and variable dielectric environments, RF admittance technology provides the highest long-term stability.
However, moderate sticky applications may be well served by tuning fork designs.
Instrava supports industrial users in evaluating these boundaries to ensure that level switch selection is based on process behavior—not assumption.
