Buy Single Phase Power Pole-Mounted Transformer

1. Single-Phase Pole-Mounted Transformer Lineup

This is the most critical and high-demand series for North American (ANSI/IEEE standard) and Latin American markets, primarily utilized in residential zones, commercial streets, and rural utility grids (e.g., single-phase $14.4\,\text{kV}$ до $120/240\,\text{V}$ split-phase systems).

Conventional Type (S Series)

• Characteristics: Built with no internal protection devices, offering the most simplified mechanical structure and the lowest initial capital cost.

• Применение: Must be deployed in conjunction with external dropout fuse cutouts and surge arresters on the utility pole.

Completely Self-Protected (CSP Series)

• Characteristics: A true high-integration plug-and-play solution. The tank internally integrates a high-voltage protective link and a secondary (low-voltage) circuit breaker, while an oxide-zinc metal oxide varistor (MOV) surge arrester is mounted directly onto the exterior shell.

• Преимущества: Provides robust protection against lightning strikes, external short circuits, and thermal overloads. It drastically simplifies pole-top wiring, slashes grid maintenance overheads, and serves as the preferred “worry-free” lineup for international power utilities.

2. Three-Phase Pole-Mounted Transformer Lineup

Primarily engineered for light industries, agricultural farms (driving high-power electric motors), and small-scale commercial complexes.

Single-Unit Three-Phase Transformers

• Characteristics: The active parts (magnetic core and phase windings) of all three phases are entirely housed within a single oil tank, with capacities typically spanning from $30\,\text{kVA}$ до $500\,\text{kVA}$.

• Применение: Offers a clean visual profile and a minimal physical footprint; commonly utilizes a Delta-Wye ($\Delta\text{-Y}$) winding configuration to establish a reliable neutral grounding point.

Three-Phase Banked Transformers (Single-Phase Combinations)

• Characteristics: Configured by mounting and interconnecting two individual single-phase units (Open-Delta / V-V connection) or three units on a single pole crossarm to deliver a three-phase power supply.

• Преимущества: Offers exceptional scalability. In the event of a single-phase failure, only the damaged unit needs to be replaced rather than the whole system. This is widely deployed in overseas industrial distribution grids with unpredictable initial load growth.

3. Environmental & Media Options

Engineered into specialized technical series based on fire safety, ecological protection, and anti-corrosion classifications:

Liquid-Filled Lineup (Mineral Oil vs. Bio-Degradable Fluid)

• Standard Mineral Oil Type: The traditional, time-tested cost-performance benchmark for general distribution networks.

• FR3 / Natural Ester (Vegetable Oil) Type: Features an ultra-high fire point of up to $360^\circ\text{C}$ and a biodegradation rate exceeding 99%. It is tailored for projects with stringent fire-mitigation mandates or ecologically sensitive zones.

Outdoor Dry-Type Pole Transformers

• Characteristics: Utilizes vacuum cast resin (CR) encapsulation or Class H Vacuum Pressure Impregnation (VPI) technologies, enclosed within an IP23 or IP44 rated weatherproof outdoor housing.

• Применение: Completely eliminates fluid leakage risks; ideal for high-density pedestrian streets or specialized metropolitan areas where liquid-filled equipment is strictly prohibited.

4. Special Network Solutions

SWER (Single Wire Earth Return) System

• Characteristics: Configured with only a single high-voltage bushing on the tank top, utilizing the earth itself as the current return path.

• Применение: Exclusively engineered for remote, sparsely populated rural grids with extremely low load densities (highly popular across Australia, New Zealand, Africa, and Latin America). This topology slashes transmission line construction budgets by eliminating the need for a second high-voltage phase wire.